Application instructions for a screen-printed transfer: special Softshell
Screen printing transfer application conditions
Read

Application guide chart

Test with a first transfer by letting it rest for 48 / 72 hours.
If the logo colors remain intact after this period, then the test is successful.

Temperature: 140 °C

Duration: 20 seconds

Pressure: 3 bars

Peeling is done cold.

How to apply a special Softshell screen printing transfer?

Temperature: 140°C | Duration: 20 seconds | Pressure: 3 bars
Optional: you can perform a first press pass to have a smooth and clean surface.
Position the screen print transfer in the desired location. Optional: add heat tape to hold your transfer in place.
Teflon sheet or parchment paper protects your heat press
Temperature: 140°C | Duration: 20 seconds | Pressure: 3 bars
Once the textile has cooled, you can remove the transfer.
Gently remove the transfer
Admire the result!

Suitable supports

Discover our expert advice for flawless application and avoid pitfalls with Sherpa Transfert.

Sports jersey

Pair text with an image to focus on your chosen image

Jacket

Pair text with an image to focus on your chosen image

Parka

Pair text with an image to focus on your chosen image

Safety Vest

Pair text with an image to focus on your chosen image

Our tips not to miss

Track your experience

Our recommendations are a starting point; feel free to adjust the settings based on your experience with your equipment.

Temperature & materials

Adjust the temperature according to your materials: run tests beforehand.

Test

Perform a test beforehand. Transfer a logo and wait at least 48 hours to check whether pigment migration is present or not. If the logo colors are intact, then the test is successful!